Saudi Arabia’s industrial base is one of the largest and most complex in the world. The Kingdom’s oil and gas sector, led by Saudi Aramco and supported by thousands of contractors and sub-suppliers operating from Dhahran, Dammam, and the Eastern Province, processes hundreds of millions of barrels of crude oil annually. Alongside this, Vision 2030 is driving rapid expansion in manufacturing, water infrastructure, and industrial diversification across Jubail Industrial City, Yanbu Industrial City, King Salman Energy Park (SPARK), and NEOM — all of which depend on reliable rotating equipment and high-quality mechanical seals.
KE Motion Hydro is a European manufacturer that supplies the mechanical seals Saudi Arabia operations require, directly from our production facility. Our products comply with EN 12756 (DIN 24960) and API 682 — the primary standards specified by Saudi Aramco and other major end-users across the Kingdom. By manufacturing and supplying directly, we offer better pricing, faster technical support, and the ability to customize seals for specific applications.
Operating in Saudi Arabia presents specific challenges for sealing technology. Ambient temperatures regularly exceed 45°C in summer across Riyadh, Jeddah, and the Eastern Province, affecting elastomer performance and accelerating thermal cycling in pump components. Many process fluids — crude oil, refined products, sour gas service media, seawater brine — are aggressive and require careful material selection. Dust and sand ingress can compromise seal faces in exposed installations across the Rub’ al Khali and northern desert regions. Continuous operation with minimal scheduled downtime means seals must be designed for maximum service life.
Our EN 12756-compliant range covers the vast majority of centrifugal pump applications in Saudi Arabia’s general industrial, water treatment, and utilities sectors — from water pumping stations in Riyadh’s expanding suburbs to utility pumps in the industrial cities of Jubail and Yanbu. Available in shaft sizes from 10mm to 100mm, these seals are dimensionally interchangeable with equivalent units from Burgmann, Flowserve, and AES.
For applications governed by API 682 — required for most process pumps in Saudi Aramco’s facilities across Ras Tanura, Abqaiq, Berri, and Shaybah, as well as SABIC’s petrochemical complexes in Jubail and Yanbu — we manufacture cartridge mechanical seals in Category 1, 2, and 3 configurations with full supporting documentation.
Split seals allow replacement without removing the pump from service or dismantling the shaft assembly — a major advantage for large pumps in Saudi Arabia’s water transmission systems, NWC (National Water Company) pumping stations, and seawater intake facilities. Split seals can reduce maintenance time from days to hours.
Saudi Aramco’s procurement ecosystem involves thousands of contractors, maintenance companies, and spare parts suppliers operating from Dammam, Al Khobar, Dhahran, and Jubail. KE Motion Hydro serves this supply chain directly, offering API 682-compliant seals with the documentation required to pass Aramco Materials System (MESC) specification checks and third-party inspection requirements.
Jubail Industrial City and Yanbu Industrial City host some of the world’s largest integrated petrochemical complexes — including SABIC affiliates Ibn Rushd, Ibn Sina, Al-Jubail Fertilizer Company (SAMAD), and Saudi Kayan. These facilities require seals capable of handling ethylene, propylene, benzene, sulfuric acid, and a wide range of specialty chemicals under high pressure and temperature. Our SiC-faced seals with FKM or FFKM (Kalrez-equivalent) elastomers are specified for these environments.
The Saline Water Conversion Corporation (SWCC) and independent water and power producers including ACWA Power operate massive SWRO and MSF desalination plants along the Gulf and Red Sea coasts — at Jubail, Ras Al-Zour, Shuqaiq, and Shoaiba. The high-pressure pumps, energy recovery devices, and transfer pumps in these facilities all require mechanical seals engineered for seawater, brine, and antiscalant compatibility.
Ma’aden’s phosphate operations at Wa’ad Al Shamal in northern Saudi Arabia, and its aluminium smelter in Ras Al Khair, use large slurry pumps for ore processing and process water circuits. These applications demand our hardest-wearing seal configurations: SiC vs. SiC faces paired with flush water Plan 32 to keep seal faces clear of abrasive particles.
SPARK, located near Jubail, is Saudi Arabia’s next-generation energy industrial zone, designed to host oil field services, equipment manufacturing, and downstream energy industries. KE Motion Hydro supports companies establishing operations at SPARK with a full range of mechanical seals for rotating equipment in these newly commissioned facilities.
Contact our engineering team to discuss your mechanical seals Saudi Arabia project or maintenance requirements. We review your application data and provide a technical recommendation with full pricing and lead time.
Email: info@kemotionhydro.com | Phone: +381 (63) 451-842 | Web: kemotionhydro.com
